Return to Home Page  
Return to Home Page              
 

E-T Five Window™
Low Angle

The Low Angle center is 2 inches deep through the windows (front to back). This is necessary for narrow or shallow wheels when putting the center as far forward as possible. This gives maximum fender clearance and is usually used for front wheels. The front side setting will be minimum. The all aluminum wheel is avaliable fully polished or with a cast center and polished rim.

It can be had smooth spoke or with E-T's trademark allen bolt in the spoke, this will allow it to match the Fueler.

 


 

Five Window Low Angle Specs & Pricing
Wheel Size Photos Front Side Setting
min - max
Back Side Setting
min - max*
Cast
Price Each
Polished
Price Each
14 x 6   3 3/4" 3" $439 n/a
           
15 x 4   3 1/8" 1 7/8" $509 $569
15 x 5 machined lip 3 1/8" 2 7/8" $265 $315
  4.5 and 4.75 PCD        
15 x 5     2 7/8 $315 $385
15 x 6   4 1/4" 2 3/4" $479 $539
15 x 7   3 1/8 to 4 1/4" 4 7/8 or 4 1/2 or3 3/4" $479 $539
15 x 8   3 1/8 to 5 1/4"

5 7/8 or 5.5 or

4 3/4 to 3 3/4"

$489 $549

 

Red, bold wheels are 1-piece cast and in stock. Other wheels are 2-piece and assembled to order with a 1-2 week turnaround. Other sizes can be made, but please call to discuss application. All wheels come with std. caps. Prices effectiveApril 03,2021

All wheels have standard wheel lip., not soft lip.

Satin finishing or polishing of Lip is $50 each.

 

Some 2-piece wheels with large backspacing requires special flanged center machining at $45 each.

 

*CAUTION: Deep backside settings, more than 4", or Reversed profile 15" 2-piece wheels may not have a brake drum or caliper diameter larger than 13 1/8". See Tech Specs page.

 

= See wheel on vehicle.    =See photo comparison of wheel in different sizes.

 

 

 

BUY THESE WHEELS

 

 


 

E-T Five Window™
High Angle

The High Angle center is 3 1/2" deep through the windows (front to back). The wide thicker center curves much further out giving a deeper bowl appearance. Because of its width, it can only be made in 8" or wider widths. The wider the rim the more offset variation is available. High Angle wheels come full polished to an almost chrome like finish or with a cast center and polished rim.

It can be had smooth spoke or with E-T's trademark allen bolt in the spoke, this will allow it to match the Fueler.

 

 


 

Five Window High Angle Specs & Pricing
Wheel Size Photos Front Side Setting
min - max
Back Side Setting
min - max*
Cast
Price Each
Polished
Price Each
15 x 8 machined lip 5 to 5 1/2" 3 1/2 to 4" $275 325
  4.5" and 4.75" PCD        
15 x 9   5 1/2 to 4 1/2" 3 1/2 to 4 1/2" $489 $559
15 x 10   6 1/2 to 7 1/4" 3 3/4 to 4 1/2" $365 NA
15 x 10   5 1/2 to 7 1/2" 3 1/2 to 5 1/2" $529 $599
15 x 12   5 1/2 to 9 1/2" 3 1/2 to 7 1/2" $559 $629
15 x 14   6 to 11" 3 1/2 to 9" $629 $699
15 x 15   6 to 11" 3 1/2 to 10" $649 $719

 

Red, bold wheels are 1-piece cast and in stock. Other wheels are 2-piece and assembled to order with a 1-2 week turnaround. Other sizes can be made, but please call to discuss application. All wheels come with std. caps. Prices effective April 03, 2022.

All wheels have standard wheel lip., not soft lip.

Satin finishing or polishing of Lip is $50 each.

 

 

*CAUTION: Deep backside settings, more than 4", or Reversed profile 15" 2-piece wheels may not have a brake drum or caliper diameter larger than 13 1/8". See Tech Specs page.

 

= See wheel on vehicle.    =See photo comparison of wheel in different sizes.

 

 

 

BUY THESE WHEELS

 

 

 

 

 

Home | Wheels | Accessories | Gallery | Tech Specs | Purchase | News | Site Map | Contact Us All material contained in this website is copyright Team Three Wheels 1960 - . All rights are reserved.